Editing revision 27 of Thermodynamics

ApchemWiki | RecentChanges | Preferences

Editing old revision 27. Saving this page will replace the latest revision with this text.

<center> Thermodynamics : The Study of the Flow of Heat / Energy</center>
 
Chapters in Zumdahl, Chapter 6 (except Section 6.5) and Chapter 16 (Section 16.7-16.9) 
Pg. 
 
 
General Information and Review 
*Print out and explain [http://tmcleod.org/cgi-bin/chem1/wiki.cgi?Overview_Of_Three_Laws_Of_Thermodynamics 1st Year's 3 Laws of Thermodynamics]
*[[AP - Major Concepts in Thermodynamics] (nothing in it right now, 9/30/15} 
*[http://www.tmcleod.org/AP/APThermo/APThermoIntro.pdf Zumdahl Notes on Internal Energy and Thermo Intro in Chapter 6] (Thermo Intro and Internal Energy notes)
*HW (in Zumdahl Pg230), #21, 23, and 25.
**need to use 101.3J / (L-atm) when using w = -P&#916;V so that units will cancel.
** you get that number/unit when you divide 8.314 J / (mole K) by 0.08206 L-atm / (mole K ).

Enthalpy [[Enthalpy]] 
*[http://tmcleod.org/cgi-bin/chem1/wiki.cgi?Notes_On_Video_Of_Enthalpy_And_Calorimetry 1st Year's Enthalpy Videos]
*[http://www.tmcleod.org/AP/APThermo/APEnthalpyNotes.pdf Zumdahl Notes for Enthalpy Intro in Chapter 6]
*Calculating Enthalpy change by: 
**Calorimetry Equations: 
***Non-phase change (system does not change phase): deltaH = (m)(deltaT)(c), where c = specific heat capacity (H2O is 1.00cal/(g-degC) or 4.18 J/(g-degC) ). There are variation on this equation where the m and c are changed but the importance thing is that units cancel.
****See [http://tmcleod.org/cgi-bin/chem1/wiki.cgi?Notes_On_Heat_Calculations 1st Year's Notes for Non-phase Change Heat Calculation Notes]
***Phase change Equation: deltaH = (m or other) (Phase change Enthalpy change)
****Big thing here is no deltaT (since in a phase change temperature does not change) and that the Phase change Enthalpy change term has some units as (m or other). 
****There are various names for Phase change Enthalpy change include Molar Heat of Vaporization, Heat of Condensation, etc. 
**Hess' Law : [http://www.tmcleod.org/AP/APThermo/EnthalpyHessLawCalculationExample.pdf Example of Hess' Law Calculations]
**Standard Enthalpy of Formation: [http://www.tmcleod.org/AP/APThermo/StandardEnthalpyFormationCalculationExample.pdf Example of Standard Enthalpy of Formation Calculations]
 
Entropy and Gibbs Free Energy 
*[[Gibbs Free Energy]]
*Watch [https://www.youtube.com/watch?v=ZsY4WcQOrfk Crash Course Video on Entropy (but also Gibbs Free Energy)] 
*

------ 
*[http://www.bozemanscience.com/ap-chem-053-net-energy-change Video Notes from Bozeman Science AP Chem on Enthalpy of Reaction including Hess Law]]

*Day One : Introduction, [http://wine1.sb.fsu.edu/chm1045/notes/Energy/Enthalpy/Energy02.htm Enthalpy], [http://wine1.sb.fsu.edu/chm1045/notes/Energy/Calorim/Energy03.htm Calorimetry],  and Hess' Law
*Day Two : Hess' Law Lab and StandardHeatofFormation
*Day Three : [[Entropy]] 
**[[Temperature of Phase Change calculation]] 
*Day 4 : SolubilityQuiz1 and GibbsFreeEnergy
*[http://www.chemcool.com/regents/kineticsequilibrium/aim4.htm Good website for potential energy diagrams]
*[http://www.tmcleod.org/AP/APThermo/APEnthalpyNotes.pdf Zumdahl Notes for Enthalpy Intro in Chapter 6]]
*[http://www.tmcleod.org/AP/APThermo/APThermoIntro.pdf Zumdahl Notes on Internal Energy and Thermo Intro in Chapter 6]]
*[http://www.tmcleod.org/AP/APThermo/StandardEnthalpyFormationCalculationExample.pdf Example of Standard Enthalpy of Formation Calculations]
*[http://www.tmcleod.org/AP/APThermo/EnthalpyHessLawCalculationExample.pdf Example of Hess' Law Calculations]

View other revisions
ApchemWiki | RecentChanges | Preferences