Editing revision 12 of Student-Directed Comparison Of Strong And Weak Acids And Bases

ApchemWiki | RecentChanges | Preferences

Editing old revision 12. Saving this page will replace the latest revision with this text.

This lab will consists of two parts as follows: 
a) Each group will make one of the solutions below and place around 20.ml into a 100.ml beaker and label it with Molarity and solution's chemical formula. 
b) Each group will determine the pH with a) pH paper (record pH to the tenth place) and b) <nowiki>LabQuest2</nowiki> pH probe of each of the 4 solutions. 
c) Each group will also determine the color change on the red and blue litmus paper. 
c) Each group will then calculate (in their lab book) the theoretical pH of each solution. Show all work as if calculations are part of a test. 
 
 
The solutions to be made are (any leftover solution will be put into plastic containers with label of molarity and chemical formula): 
a) 1.0M HCl solution, 500ml of this solution (from a concentrated, (concen), 12.0M solution) 
b) 1.0M HC2H3O2 solution, 500.ml of this solution (from a concen 12.0M solution) 
c) 1.0M <nowiki>NaOH</nowiki> solution, 500.ml of this solution (from a solid <nowiki>NaOH</nowiki>). 
d) 1.0M NH4OH solution (it is called ammonium hydroxide but the other name is ammonia water solution), 500..ml of this solution (from concen 14.5M solution) 
e) 2.0M HCl solution, 500mL of this solution from concen 12.0M solution 
 
Please show your calculations on making "your" solution. Show all work as if it was a problem on a test. Share with other groups so everybody have the calculations needed to make the 4 solutions (these calculations will be part of your lab write-up.) 
 
*[[Question for Student-Directed Comparison of Strong and Weak Acids and Bases]] 
 
---- 
2017-2018 AP Chem Extension 
 
a) To the 1.0 M HCl solution, add a few grains of <nowiki>NaCl</nowiki>, stir/dissolve salt and record new pH. 
 
b) To the 1.0M HC2H3O2 solution, add a few grains of Sodium acetate ( <nowiki>NaC</nowiki>2H3O2), stir/dissolve and record new pH. 
c) To the 1.0M <nowiki>NaOH</nowiki> solution, add a few grains of <nowiki>NaCl</nowiki>, stir/dissolve salt and record new pH. 
d) To the 1.0M NH4OH solution, add a few grains of Ammonium chloride ( NH4Cl ), stir/dissolve and record pH. 
 
Question for 2018-2018 AP Chem Extension 
 
1.

View other revisions
ApchemWiki | RecentChanges | Preferences