Editing Rate Of Reaction - Hydrogen Peroxide Lab
ChemistryWiki
|
RecentChanges
|
Preferences
<center><b>Rate of Reaction Lab</b></center> <center><b>Hydrogen Peroxide Lab</b></center> <i>Balance Chemical Reaction:</i> <br><br> <b>Effect of Temperature on Rate of Reaction</b><br> <b>Directions (Procedures)</b><br> 1. Turn on the Hot plate on the bench. One Hot plate per bench.<br> 2. Obtain a "Bubble-O-meter"<br> 3. Using scale on side of "Bubble-O-meter", add 20ml of hydrogen peroxide solution.<br> 4. Using stopwatch, record (in data table below) the number of bubbles you see in 3minutes <b>@room temperature</b><br> (Not seeing any bubbles is <nowiki>OK</nowiki>. It does not mean lab is wrong)<br> 5. Place the "Bubble-O-meter" on the hot plate (one plate per bench). Wait a few minutes for solution to heat up (wait until you see 1st bubble before starting stopwatch).<br> 6. Using stopwatch, record (in data table) the number of bubbles you see in 3minutes.<br> 7. When done, take "Bubble-O-meter" off Hot plate and let it cool back down to room temperature (wait 1-2 minute).<br> <br> <b>Effect of Catalysts on Rate of Reaction</b><br> <b>Directions (Procedures)</b><br> 1. Use the results of room temperature trial from the above procedures as you "room temp" trial. Record in data table below.<br> 2. You can use the same solution as the step above. Once "Bubble-O-meter" has cooled for a 1-2 minute (Step7), add 5-6 drops of potassium iodide (KI) solution to the hydrogen peroxide solution. Make sure that you put the top of "Bubble-O-meter" back on and that there is enough water.<br> 3. You need to wait until the catalyst (KI) starts working before you start counting drops. Count the number (& record in the data table below), the number of bubbles you see in 3minutes. <br> 4. Rinse out all parts of the "Bubble-O-meter" and put them away to dry. <br> <table bgcolor=beige border=2> <tr> <th colspan=8 align=center>Temperature vs. Reaction Rate</th> <tr> <tr> <th>Temperature</th> <th>Rxn Rate (bubbles/60.sec)</th> <tr> <tr> <th>______________</th> <th>_____________________</th> <tr> <tr> <th>______________</th> <th>_____________________</th> <tr> </table> <br> <table bgcolor=beige border=2> <tr> <th colspan=8 align=center>Presence of Catalyst vs. Reaction Rate</th> <tr> <tr> <th>Catalyst(Y/N)</th> <th>Rxn Rate (bubbles/60.sec)</th> <tr> <tr> <th>______________</th> <th>______________</th> <tr> <tr> <th>______________</th> <th>______________</th> <tr> </table> <br>
View other revisions
ChemistryWiki
|
RecentChanges
|
Preferences